Components and Special Features

1934 Chevrolet Phantom Sedan

ENGINE: Fully Polished Aluminum ZL1 502 Cu. inch
CRANK: GM
PISTONS: Speed Pro Flat Top
HEADS: Fully Polished Aluminum HP Heads
CAM: Comp Cams Roller Lifter
ROCKERS: Comp Cams Roller Rocker
VALVE COVERS: Custom Fabrication
WATER PUMP: Meziere Billet Water Pumps
INTAKE MANIFOLD: Specially Machined Hilborn
INDUCTION: Hand Fabricated EFI by Jim Foley, Reno, Nv.
IGNITION: MSD
SPARK PLUG WIRES: Taylor
STARTER: Chrome by Powermaster Motorsports
ALTERNATOR: Chrome 140 AMP by Powermaster Motorsports
HEADERS: Sanderson Ceramic Coated
EXHAUST: 2 ½” Hand Fabricated Ceramic Coated
MUFFLERS: Flowmaster Exhaust Technology
ENGINE SEALANT: Zoops Products
TRANSMISSION: Fully Polished, Special Prepared GM Turbo 350
TORQUE CONVERTER: 3500 Stall Speed B&M Super Holeshot
DRIVE SHAFT: Chrome by Economy Tool & Machine
FLUIDS: Royal Purple Oil
CHASSIS & FRAME: Hand Fabricated by Alloways Hot Rod Shop
WHEEL BASE: 116 inches
REAR END: Winters Fully Polished Quick Change Independent
RATIO: 3.84 positrac
REAR SUSPENSION: Zipper Components with Viper Coil Overs
FRONT SUSPENSION: Heidts Custom Built Stainless Steel with extended A arms
MASTER CYLINDER: Pete and Jakes
BRAKES: Wilwood with 13” diameter w/6 piston calipers
STEERING: Sweet Manufacturing Close Ratio Billet Rack and Pinion
STEERING COMPONENTS: Polished Stainless Borgeson Universal Co.
STEERING COLUMN: Ididit Tilt/Telescopic
FUEL CELL: Tanks, Inc. 15 gallon
PEDALS/SHIFTER: Lokar
BATTERY: Optima Batteries
WHEELS AND TIRES: WHEELS MAKE AND SIZE: Specially made one-off Size 19x8 front - 24x10 rear
FRONT TIRE MAKE AND SIZE: BF Goodrich 215 - 35 - 19
REAR TIRE MAKE AND SIZE: BF Goodrich 305 - 35 – 24
BODY: 1934 Chevrolet Phantom Sedan
DESIGN AND RENDERINGS: Jason Rushforth Performance Design
BODY MODS: Hand built front end/extensive rear end modifications: Rutterz Rodz
GRILLE SHELL: Hand Fabricated
GRILLE INSERT: Jim Rench, Hot Rod Stuff
TAILLIGHTS: Custom Fabricated
LED FASTENERS: ARP Fasteners - polished stainless steel, indexed through out car
WIRING: Painless Wiring
STEERING WHEEL: One-off Custom machined by Carriage Works, Inc.
DASH: One-off by Curt Cunningham of Carriage Works, Inc.
GAUGES: Specially Manufactured Classic Gauges
PAINTER: Mike Rutter, Rutterz Rodz, Bristol, Tennessee
PAINT TYPE: Hot Hues by Dupont – Blackened, Scarlet Fever, Shamrock
MIRRORS: Hidden Rear Camera w/ DVD Display
INTERIOR: Paul Atkins, Atkins Interiors, Cullman, Alabama
BATTERY: Optima
STEREO: Elite Audio, Kalispell, Montana
COMPONENTS: Eclipse Deck and Amps/Utopia Speakers and Subwoofers
CAR COVER: Covercraft

ELECTRONIC AND SAFETY FEATURES

ELECTRONIC SHUTOFF: The car incorporates an electronic electrical shutoff which has two functions. It obviously kills the entire electrical system, but the electronic shutoff also has a second position which incorporates the use of diodes and allows a 12-volt electrical source to be infused into the car so as to permit operation of headlights, turn signals, interior lights, license plate tag, and a DVD showing a rear view panorama.

EXTERNAL CHARGING CAPABILITIES: There are also hidden terminals to allow the battery to be charged or maintained from the exterior of the car without having to actually access the battery.

ELECTRONIC DOORS, WINDOWS, AND LICENSE TAG: There is a multifunction FOB which allows opening of the driver’s door and passenger’s door, operation of driver’s and passenger’s windows, and the raising and lowering of the license plate, all from outside of the car.

SAFETY FEATURES: There are no external or internal door openers, and the doors are opened from the inside of the car by touching a small electronic button on the passenger’s side for the passenger door and on the driver’s side for the driver’s door. Since the doors are suicide doors, these electronic openers are electronically disabled when the engine is started, providing an additional safety factor so as to absolutely protect against the unintentional opening of the doors while the car is in motion.

TURN SIGNAL INDICATORS: The front turn signals have been incorporated into the lens of the headlights and the rear turn signals are sequential in the taillight.

REAR VIEW: In addition, to preserve the clean lines of the car, a camera was hidden in the rear of the chassis, which displays a full panorama rear view on a DVD screen in the console of the car. This enables the driver to see and know what is behind the vehicle at all times.

Special Features

* 1934 Chevrolet Grill Shell sectioned 6” and narrowed 4.5”
* Handmade front lower air-dam to flow air to radiator
* Handmade bottom Grill Shell which mates to lower frame cross-member
* Grill interior done in flat black to make it disappear
* Hand Made sheath surrounding radiator
* Wiring to cooling fan through frame so completely hidden
* Especially manufactured “Bow Tie” on grill secured with hidden fasteners
* All front suspension replated or polished
* Special plugs machined and plated for front spindles
* Polished Billet aluminum top and bottom ball-joint covers
* Front and rear hubs utilize machine plugs to fill all unused holes
* Ball joints and tie rod ends use acorn nuts with tapped allen locks for safety
* Polished Wilwood 6 piston calipers and 13” cross-drilled rotors
* All allen head fasteners plugged with polished covers
* All front suspension plates boxed and smoothed
* Headlight mounts handmade and boxed
* One-off headlight mounting brackets
* Headlight mounting bolts hidden and all wiring hidden inside boxed mounts
* Handmade turn signals hidden inside headlights
* All polished stainless or braided brake lines
* Stainless brake lines are brought through frame with polished aluminum fittings
* Front stainless brake lines are designed to float with suspension
* All residual brake valves utilized in the car
* Wheels are one-off special construction by Boyd Coddington
* Rear wheels are 24” x 10”, Front wheels are 19” x 8”
* Machined and polished center wheel caps
* Steering wheel machined to match wheels
* Horn ring machined to match wheels
* Gauge bezels machined to match wheels
* Transmission fully polished
* All transmission lines are polished or braided stainless
* Right and left exhaust are uniformly bent as mirror images as they exit headers
* Specially formed hood reveal to showcase Hilborn Fuel Injection
* Hood side panels boxed around suspension
* Specially made hood side tray in engine compartment to cover frame rails
* All steering knuckles are polished stainless and plugged
* Steering components are diveted to accommodate allen set screws for safety
* Fully adjustable seat travel and adjustable seat backs
* Hand fabricated polished decorative aluminum on interior doors, quarter panels and headliner
* All window glass edges polished and painted
* Handmade end covers incorporated into doors to cover window felt on each end
* Removable rear quarter glass
* Console all hand fabricated and includes switches hidden under the decorative leather cover
* Rear camera mounted in custom polished housing which displays rear view on DVD monitor on console
* Magnetic fuel door
* Fuel filler overflow and fuel tank overflow routed through and exits frame
* Diodes utilized to enable use of interior spotlights to highlight interior
* Interior spotlights operated via a 12 volt external power source
* Hidden power plugs to enable battery to be charged during off-season
* One-off design LED taillights which incorporate a 3^rd brake light
* One-off Winters Quick change rear end cover
* One-off polished rear camber bar
* Rear pan handmade to follow the line of the car
* Wheel arches handmade and raised 3” to accommodate 24” rear wheels
* Handmade rear wheel tubs
* Chromed hand fabricated rear exhaust cap

GoDaddy